T1C Flag Logo T-Shirt Fit and Style Guide
By Tier 1 Concealed | Published: 2026-10-29
Category: How-to Guides
Learn how to choose the right size and style your T1C Flag Logo T-Shirt. This guide covers fit, fabric, and care tips for a great look.
Quick Answer
To get the best fit for your T1C Flag Logo T-Shirt, measure your chest and the high point shoulder length, then choose a size that allows a little room for movement—this tee runs true to size with a classic, not slim, cut.
Why Fit Matters for This Tee
The T1C Flag Logo T-Shirt uses a 60% cotton, 40% polyester blend that gives it a soft hand and light structure. That means it won't shrink dramatically, but it also won't stretch out much over time. Getting the fit right from the start keeps the flag graphic centered and the hem sitting where you want it.
Style Notes for the Flag Logo
The flag logo is a bold, centered print that works best when the shirt isn't tucked in or when it's worn open under an unzipped jacket. Because the graphic is large, avoid oversized fits that let the design wrap around your sides—it can distort the look. A tailored, not tight, fit keeps the logo flat and readable.
Step-by-Step Fit Guide
- Measure Your High Point Shoulder (HPS): Stand straight with a soft measuring tape. Place the end at the highest point of your shoulder (near the neck) and let the tape drop straight down to where you want the hem to end. Common mistake: measuring from the collarbone instead of the shoulder peak, which shortens the length. Write down your HPS in inches—compare it to the size chart's HPS column.
- Measure Your Chest/Bust Width: Wrap the tape around the fullest part of your chest, keeping it level under your arms and across your shoulder blades. Then divide that number by 2 to get the half-bust that matches the tee's 'Bust/Width' spec. Common mistake: using your full chest circumference without dividing, which leads to picking a size too large. Half your chest circumference should be within 1-2 inches of the tee's Bust/Width measurement for a classic fit.
- Choose Your Size and Consider Layering: Compare your HPS and half-bust to the size chart. If you're between sizes, go with the larger size if you plan to layer over a base layer or want a relaxed look. Go with the smaller size if you prefer a trim fit. Common mistake: ignoring layering plans and ending up with a tee that's too tight over a long-sleeve shirt. When in doubt, size up—the cotton-poly blend has minimal stretch, and a slightly looser tee drapes better than one that pulls at the seams.
Product Facts
- T1C - FLAG LOGO T-SHIRT: High Point Shoulder (HPS) is measured from the highest point of the shoulder to the bottom hem. Bust/Width measures across the bust 1” below the armhole, seam to seam. Using HPS and bust measurements instead of your usual letter size ensures the tee's length and width match your body, preventing the logo from sitting too high or the hem from riding up.
T1C - FLAG LOGO T-SHIRT
