T1C Team Tier 1 T-Shirt: Fit, Fabric, and Care Guide

By Tier 1 Concealed | Published: 2026-10-31

Category: Tips & Care

A practical wash-and-wear routine for the T1C Team Tier 1 T-Shirt, plus a quick fit check and the fabric facts that shape how you should care for it.

Quick answer

Wash your T1C Team Tier 1 T-Shirt inside out in cold water on a gentle cycle, skip fabric softener and chlorine bleach, and air-dry it or tumble low. That routine protects the 60% cotton, 40% polyester knit and the printed design, and it keeps sizing predictable from wash to wash.

Why the 60/40 blend changes your care routine

The T1C - TEAM TIER 1 - T-SHIRT is a 60% cotton, 40% polyester knit. That blend is a useful middle ground: cotton brings breathability and a soft hand, while polyester adds shape retention and faster drying. The tradeoff is heat sensitivity. High dryer heat stresses both fibers and the print, so the gentler drying option is the one to default to.

The catalog lists size and color options but does not publish a measured chest or body length chart, so treat the fit check below as a practical starting point rather than a substitute for a size chart. If you are between sizes, order the larger one and plan to wash cold.

The print is the part most care advice gets wrong

Graphic tees usually fail at the print edges, not at the seams. Abrasion from other garments, hot water, and direct dryer heat are the common culprits behind cracking and fading. Turning the shirt inside out and washing it with similar colors reduces surface friction, and air-drying removes the heat cycle entirely.

One exception: if the shirt is heavily soiled or sweaty, a cold pre-soak with a gentle detergent is safer than reaching for hot water or bleach. Spot-treat stains from the inside of the fabric outward so you do not push pigment deeper into the print area.

Step-by-step: wash, dry, and check the fit

Turn the shirt inside out before washing: Close any zippers or hooks on nearby garments, then turn the tee inside out and wash it with similar colors on a cold, gentle cycle. Common mistake: washing with towels or heavy denim, which abrades the print.
Use a gentle detergent and skip the extras: Measure a mild liquid detergent for the load size. Do not add chlorine bleach or fabric softener, and do not overload the drum. Checkpoint: if the shirt still smells after one wash, pre-soak in cold water rather than raising the temperature.
Air-dry or tumble on low: Reshape the shirt while damp and hang or lay it flat to dry. If you use a dryer, choose the lowest heat setting and remove the shirt while slightly damp. Common mistake: high heat, which is the fastest way to shrink the cotton and crack the print.
Run a fit check before you buy: Measure a t-shirt you already like from the highest point of the shoulder to the bottom hem, and compare that length to the size you are considering. Because the catalog does not publish a full measurement chart, use your own reference shirt as the baseline. Checkpoint: if you are between sizes, size up and wash cold to limit shrinkage.
Store folded, not on a wire hanger: Fold the shirt and keep it away from direct sunlight. Avoid hanging it by the collar for long periods, which can stretch the neckline. Common mistake: storing a damp shirt in a closed drawer, which traps odor and can set stains.

Product facts that affect care

T1C - TEAM TIER 1 - T-SHIRT: The T1C - TEAM TIER 1 - T-SHIRT is made from 60% cotton and 40% polyester. The blend dries faster than all-cotton and holds shape better, but it still needs low heat to avoid shrinkage and print stress.
T1C - TEAM TIER 1 - T-SHIRT
T1C - TEAM TIER 1 - T-SHIRT: The shirt is available in multiple sizes and colors. Wash dark colors separately and inside out to limit dye transfer and surface fading across the range.