Start with the fabric, then the fit
The T1C TRAINING AWAITS T-Shirt is a men's crew made from 60% cotton and 40% polyester. That blend is the first clue to how it will feel and wear: cotton brings softness and breathability, while polyester adds durability and helps the shirt hold its shape. The catalog does not specify a fabric weight or knit type beyond the blend, so treat this as a general starting point rather than a promise of a particular hand feel.
Because the shirt is a graphic tee, the print is part of the product. The supplied information does not describe the print method or its care requirements, so the safest approach is to treat the printed area gently and avoid anything that could abrade or fade it. The catalog also does not list care instructions, so you will not find a manufacturer-approved wash temperature or drying method here. What follows is practical, conservative guidance for a cotton-poly graphic tee, not a set of instructions from the brand.
How to read the T1C TRAINING AWAITS size chart
The size chart gives you two measurements: High Point Shoulder (HPS) length and bust/width. HPS length runs from the highest point of the shoulder to the bottom hem. Bust/width is measured across the bust, seam to seam, below the armhole. The catalog does not state the exact distance below the armhole used for that bust measurement, so use it as a relative guide rather than a precise tailoring number.
The available sizes are Small through 3XL, with HPS lengths listed as 28, 29, 30, 31, 32, and 33. Bust widths are listed as 19, 20 1/2, 22, 24, and 26. The catalog does not label the unit for these values, so confirm the unit on the product page before comparing them to a shirt you already own. A useful method is to lay a well-fitting tee flat, measure its width seam to seam in the same spot, and compare that number to the chart. Do the same for length from the high shoulder point to the hem. This tells you more about fit than your usual size label, because sizing varies between brands.
T1C TRAINING AWAITS T-Shirt: catalog facts
- T1C - TRAINING AWAITS T-SHIRT: 60% cotton, 40% polyester The blend balances softness with durability and shape retention, which is a sensible baseline for a graphic tee.

T1C - TRAINING AWAITS T-SHIRT - T1C - TRAINING AWAITS T-SHIRT: Men's crew neck; sizes Small through 3XL Confirms the silhouette and the size range available for your order.
- T1C - TRAINING AWAITS T-SHIRT: HPS length listed as 28 through 33 across sizes HPS length helps you judge where the hem will sit, but the catalog does not state the unit, so verify it before comparing.
- T1C - TRAINING AWAITS T-SHIRT: Bust/width listed as 19 through 26 across sizes Use this with a flat measurement of a tee you already like to choose a size with more confidence.
Colors, sizing, and what the catalog does not confirm
The shirt comes in Black, Military Green, Heather Red, Charcoal, and Royal Blue, depending on size availability. The catalog does not state whether the fabric is pre-shrunk, so you cannot assume it will or will not shrink. If you are between sizes and prefer a looser fit, the measurements are your best tool; if you prefer a closer fit, compare the bust width carefully to a tee you already own.
The catalog does not describe the graphic's print method, ink type, or any special finish. That matters for care because different print methods have different tolerances for heat and abrasion. Without that information, avoid guessing and keep your washing approach gentle.
A practical care routine for a cotton-poly graphic tee
The catalog does not list care instructions for this shirt. The steps below are general good practice for a 60/40 cotton-poly graphic tee, not manufacturer instructions. Always check the care label on the shirt when it arrives and follow that first.
- Turn the shirt inside out before washing: This reduces abrasion on the printed area from other garments and the drum.
- Wash in cool or cold water on a gentle cycle: Cooler water is gentler on cotton-poly blends and prints than hot water. The catalog does not specify a temperature, so choose the cooler end of your machine's range.
- Use a mild detergent and skip bleach: Bleach can weaken fibers and affect color. The catalog does not confirm bleach compatibility, so avoid it.
- Avoid fabric softener on the print: Softener can leave residue that affects some prints. If you use it, keep it away from the graphic area.
- Tumble dry low or hang to dry: Low heat is safer for the blend and the print. Air drying is the gentlest option, though the catalog does not state a preferred method.
- Do not iron directly on the graphic: If you need to smooth the shirt, iron the reverse side or use a pressing cloth. The catalog does not provide ironing guidance, so err on the side of caution.
Ordering and shipping details worth knowing
If you order the T1C TRAINING AWAITS T-Shirt together with a holster, the shirt will ship in the same package when the holster ships. If you order the shirt alone, allow 5-7 business days for the order to ship. That timing comes from the catalog and is useful to factor in if you are buying the shirt for a specific date.

