Back to Blog
How-to Guides 2026-11-20 Tier 1 Concealed 0 views

Trijicon RMR Adjustable: Pistol Installation Guide

Trijicon RMR Adjustable: Pistol Installation Guide

Learn how to install the Trijicon RMR Adjustable (Type 2) on your pistol, including mounting, brightness settings, and auto-adjust mode. Practical steps for a secure setup.

Before You Start: What the Trijicon RMR Adjustable Is

The Trijicon RMR (Ruggedized Miniature Reflex) Type 2, model RM06, is an LED-powered reflex sight designed for pistols, rifles, and shotguns. It uses a standard CR2032 battery and is housed in forged aluminum for durability. This guide focuses on installing it on a pistol, using the supplied facts to cover mounting, brightness adjustment, and battery-saving features.

Trijicon RMR Adjustable at a Glance

  • Trijicon RMR Adjustable: The RMR Type 2 is an LED sight powered by a standard CR2032 battery, housed in rugged forged aluminum. The battery is user-replaceable and common, so you can find replacements easily. The aluminum housing adds durability without excessive weight.
    Trijicon RMR Adjustable
    Trijicon RMR Adjustable
  • Trijicon RMR Adjustable: New easy-to-use adjusters with audible clicks allow for quick windage and elevation adjustments. Audible clicks give tactile and audible feedback, so you can make precise zeroing adjustments without looking at the sight.
  • Trijicon RMR Adjustable: With eight available brightness settings, the reticle can be manually adjusted by pressing the plus or minus buttons on either side of the unit. Eight settings let you adapt to different lighting conditions, from low-light to bright daylight, without washing out the reticle.

Step 1: Prepare Your Pistol and Tools

Ensure your pistol slide is cut for an RMR footprint (or has an appropriate adapter plate). You will need a small flathead screwdriver or Torx wrench (depending on the screws supplied with your mounting kit), a CR2032 battery, and a clean, lint-free cloth.

  1. Check slide compatibility: The RMR Type 2 mounts directly to slides cut for the RMR footprint. If your slide is not pre-cut, you may need a gunsmith or adapter plate—check your pistol manufacturer's specifications.
  2. Gather tools and battery: The sight uses a CR2032 battery. Have a fresh battery ready, along with the appropriate screwdriver for the mounting screws.

Step 2: Install the Battery

The RMR RM06 is powered by a CR2032 battery. To install or replace it, remove the battery compartment cover (usually on the top or side of the sight, depending on your unit). Insert the battery with the positive side facing up, then replace the cover securely.

  1. Battery orientation: The positive (+) side of the CR2032 should face upward. Incorrect orientation may prevent the sight from powering on.
  2. Battery life saving tip: To save battery life, turn the optic off by pressing both buttons simultaneously and holding for 3 seconds. The supplied instructions confirm this method.

Step 3: Mount the Sight to the Slide

Position the RMR on the slide's mounting surface, aligning the screw holes. Use the supplied screws (or those from your mounting kit) to attach the sight. Tighten them in a cross-pattern to ensure even pressure. Do not overtighten—follow the torque specification from your mounting kit if available.

  1. Mounting alignment: The RMR should sit flush against the slide. If it rocks or has gaps, check that the mounting surface is clean and debris-free.
  2. Screw tightening: Use a torque wrench set to the manufacturer's recommended value (typically 15-20 in-lbs for RMR screws, but confirm with your kit). Overtightening can strip threads or damage the sight.

Step 4: Zero the Sight Using Windage and Elevation Adjusters

The RMR Adjustable features easy-to-use adjusters with audible clicks for windage (left/right) and elevation (up/down). Each click typically moves the point of impact a specific distance at a given range (e.g., 1 MOA per click at 100 yards—confirm with your unit's manual).

  1. Windage adjustment: Turn the windage screw clockwise to move the point of impact right, counterclockwise to move it left. The audible clicks give feedback without needing to look at the adjuster.
  2. Elevation adjustment: Turn the elevation screw clockwise to move the point of impact down, counterclockwise to move it up. Make small adjustments and test-fire between changes.

Step 5: Set the Brightness and Use Auto-Adjust Mode

The RMR has eight manual brightness settings plus an auto-adjust mode. To cycle through manual settings, press the plus (+) button to increase brightness or the minus (-) button to decrease it.

  1. Manual brightness: Press the plus or minus buttons to adjust the reticle brightness for your lighting conditions. Use lower settings in low light and higher settings in bright daylight.
  2. Auto-adjust mode: To switch to auto-adjust mode, press both buttons simultaneously and release. The sight will then automatically adjust brightness based on ambient light. To return to manual, press any brightness button.

Final Check and Usage Notes

After mounting and zeroing, verify that all screws are tight and the sight holds zero after a few test shots. The Trijicon RMR Type 2 is designed for military, law enforcement, and hunting use, and its rugged aluminum housing can withstand recoil. Remember to turn off the optic when not in use (press both buttons and hold for 3 seconds) to save battery life. If you ever need to replace the battery, repeat Step 2.

Related Articles

Customer Service
Home
Products
Cart
Profile